BenQ GW2406Z review: Price
You can see the other monitors we recommend in our Best monitors roundup.
BenQ GW2406Z review: Features and design
The GW2406Z isn’t aimed at gamers specifically – IPS screens don’t have the fast response rates of TN panels. But for casual gamers it will be fine. Instead, this is a ‘general use’ screen that’s going after those that want a good-looking monitor and the kind of ultra-thin bezels we’re starting to see on laptops and high-end TVs. Note that the display itself doesn’t go right to the edge of the panel, but stops a few millimetres before it, so the total bezel width is around 10mm, but has the appearance of 5mm. This thinning down appears to have only one drawback: the power supply is external rather than built in. But it’s a minor inconvenience if you can hide it out of sight somewhere under your desk. At this price you wouldn’t expect a fully adjustable stand, and you don’t get one. The screen tilts up and down, but that’s it. It does have three inputs: DisplayPort 1.2, HDMI 1.4 and VGA D-Sub. There’s a headphone output which routes audio from the HDMI or DisplayPort inputs, but there are no built-in speakers. VGA and HDMI cables are bundled in the box. The 24in panel has the expected 1920×1080 full-HD resolution, but BenQ lists it as an AH-IPS panel. This stands for Advanced High-performance IPS, but essentially it is the same as other IPS screens. You won’t find a whole lot of image controls in the on-screen menu, such as gamma or colour temperature presets, but the essentials are there. Using the OSD is a pain because, as with so many monitors, the button labels are almost invisible. And the five buttons in the bottom edge all feel the same to your fingers, so it’s all too easy to press the power button instead of the menu button.
BenQ GW2406Z review: Performance
Considering the price, image quality is decent. Attaching our Spyder5Elite colorimeter, we measured a maximum brightness of 240.6cm/m2 and contrast of 750:1 (lower than the claimed 250cd/m2 and 1000:1), but at least contrast remained the same no matter the brightness level. At the recommended brightness of 120cm/m2, the black level of 0.25cd/m2 isn’t amazingly inky but – again, for the price – it’s perfectly workable. The average Delta E of 1.92 is towards the higher end of what we like to see, but in general colours and greyscale are accurate. Using the Spyder to calibrate the screen we saw a final gamma of 2.26, which is fairly close to the ideal of 2.2. But the out of the box settings are not far off that, so you won’t necessarily need a calibrator. The 2406Z covers 98 percent of the sRGB gamut, 77 percent of Adobe RGB and 74 percent of NTSC. This, along with the reasonably accurate out-of-box colours, means it’s a good budget choice for editing photos and colour-correcting video, although not if this needs to be done to professional standards. It’s just better than the average TN-based monitor. Contrast, although not the highest, is good enough and thanks to the IPS panel, viewing angles are very good both horizontally and vertically. What this means is that, unlike cheap TN monitors, you won’t be tilting the screen back and forward to try to figure out which emails are read and unread – the subtly different shades are easily discernible on the BenQ. It also means minimal colour shift and brightness dropoff if you’re not viewing the display square on. But if you like to play a lot of fast-paced games, you might be better off with the similarly priced AOC G2460VQ6 which has a 75Hz TN panel. Jim has been testing and reviewing products for over 20 years. His main beats include VPN services and antivirus. He also covers smart home tech, mesh Wi-Fi and electric bikes.
